LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Transfer Case) >> Unit Disassembly And Assembly >> Front Drive Shaft >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bearing using Tools.

    Tool number (A): ST35300000 (-) 

    (B): ST30021000 (J-22912-01) 

    Fig 1: Removing Front Bearing Using Tools
    G08711084Courtesy of NISSAN NORTH AMERICA, INC.
  2. Remove the rear bearing using Tools.

    Tool number (A): ST33710000 (-) 

    (B): ST30021000 (J-22912-01) 

    Fig 2: Removing Rear Bearing Using Tools
    G08711085Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals