LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Warning Chime System) >> System Description >> System >> Warning Chime System >> WARNING CHIME SYSTEM: Fail-Safe >> Fail-Safe

WARNING CHIME SYSTEM: Fail-Safe: Fail-Safe

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.

Function Specifications
Speedometer Reset to zero by suspending communication.
Tachometer
Engine coolant temperature gauge
Illumination control When suspending communication, changes to nighttime mode.
Information display Odo/trip meter An indicated value is maintained at communications blackout.
Shift position indicator The display turns OFF by suspending communication.
Door open warning The display turns OFF by suspending communication.
Trunk open warning
Fuel filler cap warning
Low tire pressure warning
Buzzer The buzzer turns OFF by suspending communication.
Warning lamp/indicator lamp ABS warning lamp The lamp turns ON by suspending communication.
VDC warning lamp
VDC OFF indicator lamp
Brake warning lamp
IBA OFF indicator lamp
AWD warning lamp
Malfunction indicator lamp
CRUISE warning lamp
Low tire pressure warning lamp The lamp blinking caused by suspending communication.
AFS OFF indicator lamp
High beam indicator lamp The lamp turns OFF by suspending communication.
Turn signal indicator lamp
Front fog lamp indicator lamp
Tail lamp indicator lamp
A/T CHECK indicator lamp
4WAS warning lamp
Lane departure warning lamp
LDP ON indicator lamp
Oil pressure warning lamp
ECO drive indicator
Blind Spot Intervention ON indicator
BSW/Blind Spot Intervention warning lamp