LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Heater & Air Conditioning Control System) >> Removal And Installation >> Humidity Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front camera finisher. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect harness connector from humidity sensor.
  3. Disengage fixing pawls, and then remove humidity sensor.
scientia non olet · About LEMON Manuals