LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Security Control System) >> DTC/Circuit Diagnosis >> DTC B26F3: Starter Control Relay >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Press push-button ignition switch under the following conditions to start engine.
      • Selector lever: In the P position
      • Brake pedal: Depressed
    2. Wait 2 seconds after engine started.
    3. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals