LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Security Control System) >> DTC/Circuit Diagnosis >> DTC B210F: Shift Position/Clutch Interlock Switch >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Shift selector lever to the P position.
    2. Turn ignition switch ON and wait 1 second or more.
    3. Shift selector lever to the N position and wait 1 second or more.
    4. Shift selector lever to any position other than P and N, and wait 1 second or more.
    5. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals