Interrupt Indication

• The combination meter displays an interrupt regarding a warning, alert, and maintenance on the information display, based on signals received from each unit and switch.
• When conditions are satisfied, the normal screen switches to a warning screen to display an interrupt.

Door Open Warning

• When all the following operating conditions are satisfied, the combination meter displays a door open warning on the information display by an interrupt.

  Operating condition
  Ignition switch	ON
  Door	Any door is open

• The combination meter judges showing/hiding of "door open warning", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Door switch signal	Door switch → BCM →CAN Communication Line→ Combination meter

  Trunk Open Warning

• When all the following operating conditions are satisfied, the combination meter displays a trunk open warning on the information display by an interrupt.

  Operating condition
  Ignition switch	ON
  Trunk	Open

• The combination meter judges showing/hiding of "trunk open warning", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Trunk switch signal	Trunk room lamp switch → BCM →CAN Communication Line→ Combination meter

  Parking Brake Release Warning

• When all the following operating conditions are satisfied, the combination meter displays a parking brake release warning on the information display by an interrupt.

  Operating condition
  Ignition switch	ON
  Parking brake	Applied
  Vehicle speed	7 km/h (4.3 MPH) or more

• The combination meter judges showing/hiding of "parking brake release warning", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Parking brake switch signal	Parking brake switch → Combination meter
  Vehicle speed signal	ABS actuator and electric unit (control unit) →CAN Communication Line→ Combination meter

  Low Fuel Warning

• When all the following operating conditions are satisfied, the combination meter displays a low fuel warning on the information display by an interrupt.

  Operating condition
  Ignition switch	ON
  Fuel remaining quantity(1)	Approximately 16 liters (4 - 1/4 US gal, 3 - 1/2 Imp gal) or less (including fuel remained)
  (1) With the vehicle in a horizontal position

• The combination meter judges showing/hiding of "low fuel warning", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Fuel level sensor signal	Fuel level sensor → Combination meter

  Low washer fluid warning

• When all the following operating conditions are satisfied, the combination meter displays a low washer fluid warning on the information display by an interrupt.

  Operating condition
  Ignition switch	ON
  Washer level switch	Decrease in fluid level (washer level switch ON for 180 seconds or more)

  Fig 1: Washer Level Switch And Low Washer Fluid Warning Blinking Pattern

  Courtesy of NISSAN NORTH AMERICA, INC.
• The combination meter judges showing/hiding of "low washer fluid warning", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Washer level switch signal	Washer level switch → Combination meter

  Fuel Filler Cap Warning

• The combination meter judges showing/hiding of "fuel filler cap warning", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Fuel filler cap warning display signal	ECM →CAN Communication Line→ Combination meter

• For further information, refer to "FUEL FILLER CAP WARNING SYSTEM: SYSTEM DESCRIPTION " (VQ37VHR) or "FUEL FILLER CAP WARNING SYSTEM: SYSTEM DESCRIPTION " (VK56VD).

  Low Tire Pressure Warning

• The combination meter judges showing/hiding of "low tire pressure warning", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Low tire pressure warning lamp signal	BCM →CAN Communication Line→ Combination meter

• For further information, refer to "SYSTEM DESCRIPTION ".

  Travel Time (Alert)

• When all the following operating conditions are satisfied, the combination meter displays a travel time on the information display by an interrupt.

  Operating condition
  Ignition switch	Switch-ON time

• The combination meter judges showing/hiding of "travel time", according to the signal below:

  Signal name	Signal path
  Ignition signal	-

  Low Ambient Temperature (Alert)

• When all the following operating conditions are satisfied, the combination meter displays a low ambient temperature on the information display by an interrupt.

  Operating condition
  Ignition switch	ON
  Ambient temperature	3 °C (37 °F) or less
  information display	"ON" is selected in "SETTING"

• The combination meter judges showing/hiding of "low ambient temperature", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Ambient sensor signal	Ambient sensor → A/C auto amp. →CAN Communication Line→ Combination meter

  Tire (Maintenance)

• When all the following operating conditions are satisfied, the combination meter displays a tire warning on the information display by an interrupt.

  Operating condition
  Ignition switch	ON
  Mileage	More than value set in "SETTING"

• The combination meter judges showing/hiding of "tire warning", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Vehicle speed signal	ABS actuator and electric unit (control unit) →CAN Communication Line→ Combination meter

  Oil Filter (Maintenance)

• When all the following operating conditions are satisfied, the combination meter displays a oil filter warning on the information display by an interrupt.

  Operating condition
  Ignition switch	ON
  Mileage	More than value set in "SETTING"

• The combination meter judges showing/hiding of "oil filter warning", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Vehicle speed signal	ABS actuator and electric unit (control unit) →CAN Communication Line→ Combination meter

  Engine Oil (Maintenance)

• When all the following operating conditions are satisfied, the combination meter displays a engine oil warning on the information display by an interrupt.

  Operating condition
  Ignition switch	ON
  Mileage	More than value set in "SETTING"

• The combination meter judges showing/hiding of "engine oil warning", according to the signals below:

  Signal name	Signal path
  Ignition Signal	-
  Vehicle speed signal	ABS actuator and electric unit (control unit) →CAN Communication Line→ Combination meter

  Other (Maintenance)

• When all the following operating conditions are satisfied, the combination meter displays a other warning on the information display by an interrupt.

  Operating condition
  Ignition switch	ON
  Mileage	More than value set in "SETTING"

• The combination meter judges showing/hiding of "other warning", according to the signals below:

  Signal name	Signal path
  Ignition signal	-
  Vehicle speed signal	ABS actuator and electric unit (control unit) →CAN Communication Line→ Combination meter

  Meter Illumination Level Indication

  When receiving the following signals, the combination meter causes an interrupt on the information display to indicate an illumination level.

  Signal name	Signal path
  Ignition signal	-
  Illumination control switch signal (+)	Meter control switch → Combination meter
  Illumination control switch signal (-)