LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Drive Mode System (INFINITI Drive Mode Selector) >> DTC/Circuit Diagnosis >> Drive Mode Select Switch Circuit >> Component Inspection

Component Inspection

  1. DRIVE MODE SELECT SWITCH INSPECTION 
    1. Turn ignition switch OFF.
    2. Disconnect drive mode select switch connector.
    3. Check continuity between drive mode select switch connector terminal 6 and drive mode select switch connector terminals 1, 2, 3 and 4.
      Drive mode select switch Switch position Continuity
      Terminals
      6 1 SNOW Exist.
      2 ECO
      3 STANDARD
      4 SPORT

      Is the inspection result normal? 

      YES: Inspection

      NO: Replace drive mode select switch

scientia non olet · About LEMON Manuals