Physical Values
NOTE:
- HPCM is located behind the rear seat. For this inspection, remove the rear seat.
- Pulse signal is measured by CONSULT.
| Terminal No. (Wire color) | Description | Condition | Value (Approx.) | ||
|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||
| 1 (R) | 21 (W) (L) | Accelerator pedal position sensor 1 | Input | [Ignition switch: ON] Accelerator pedal: Fully depressed | More than 4.0 V |
| [Ignition switch: ON] Accelerator pedal: Fully released | Less than 1.0 V | ||||
| 2 (B) | - | Sensor ground (Clutch 1 stroke sensor) | - | - | - |
| 3 (W) | 20 (B/R) | DC/DC converter pre-charge signal | Input | DC/DC converter: pre-charge OFF | More than 9.0 V |
| DC/DC converter: pre-charge ON | Less than 2.0 - 4.7 V | ||||
| 4 (Y) | - | Sensor ground (ICC steering switch) (ASCD steering switch) | - | - | - |
| 5 (SB) | 4 (Y) | ICC steering switch | Input | [Ignition switch: ON] ICC steering switch: OFF | 4.2 V |
| [Ignition switch: ON] MAIN switch: Pressed | 0 V | ||||
| [Ignition switch: ON] CANCEL switch: Pressed | 1.9 V | ||||
| [Ignition switch: ON] RESUME/ACCELERATE switch: Pressed | 3.7 V | ||||
| [Ignition switch: ON] SET/COAST switch: Pressed | 3.2 V | ||||
| [Ignition switch: ON] DISTANCE switch: Pressed | 2.6 V | ||||
| [Ignition switch: ON] Dynamic driver assistance switch: Pressed | 0 V | ||||
| ASCD steering switch | Input | [Ignition switch: ON] ASCD steering switch: OFF | 4.0 V | ||
| [Ignition switch: ON] MAIN switch: Pressed | 0 V | ||||
| [Ignition switch: ON] CANCEL switch: Pressed | 1.0 V | ||||
| [Ignition switch: ON] RESUME/ACCELERATE switch: Pressed | 3.0 V | ||||
| [Ignition switch: ON] SET/COAST switch: Pressed | 2.0 V | ||||
| 10 (G) | 21 (W) (L) | Sensor power supply (Accelerator pedal position sensor 1) | - | [Ignition switch: ON] | 4.5 - 5.5 V |
| 11 (W) | 2 (B) | Sensor power supply (Clutch 1 stroke sensor) | - | [Ignition switch: ON] | 4.5 - 5.5 V |
| 15 (GR) | 20 (B/R) | System main relay 2 | - | - | - |
| 16 (V) | 20 (B/R) | Self shut-OFF relay | Output | [Ignition switch: OFF] | Less than 2.0 V |
| [Ignition switch: ON] | More than battery voltage - 2.0 V | ||||
| 17 (BR) | 20 (B/R) | Power supply for HPCM | Input | [Ignition switch: ON] | More than 9.5 V |
| 18 (BR) | 20 (B/R) | Power supply for HPCM | Input | [Ignition switch: ON] | More than 9.5 V |
| 20 (B/R) | - | HPCM ground | - | - | - |
| 21 (W) (L) | - | Sensor ground (Accelerator pedal position sensor 1) | - | - | - |
| 22 (R) | 2 (B) | Clutch 1 stroke sensor | Input | [Engine running] Selector lever: P Clutch 1: Engage | 1.0 - 2.5 V |
| [Engine stopped] Selector lever: N, R or D Clutch 1: Disengage | More than 1.8 - 3.3 V | ||||
| 24 (LG) | 20 (B/R) | DC/DC converter activate signal | Input | DC/DC converter: Not activation | Less than 1.4 V |
| DC/DC converter: Activation | More than 5.3 V | ||||
| 27 (B) | - | Sensor ground (Accelerator pedal position sensor 2) | - | - | - |
| 28 (Y) (W) | 27 (B) | Accelerator pedal position sensor 2 | Input | [Ignition switch: ON] Accelerator pedal: Fully depressed | More than 2.0 V |
| [Ignition switch: ON] Accelerator pedal: Fully released | Less than 0.5 V | ||||
| 30 (BR) | 20 (B/R) | DC/DC converter voltage stabilizer signal | Output | [READY] | 1.5 - 9.0 V |
| 31 (L) | 27 (B) | Sensor power supply (Accelerator pedal position sensor 2) | - | [Ignition switch: ON] | 4.5 - 5.5 V |
| 34 (O) | 20 (B/R) | System main relay 1 | Output | [Ignition switch: OFF] | Less than 2.0 V |
| [Ignition switch: ON] | More than battery voltage - 2.0 V | ||||
| 36 (P) | 20 (B/R) | IGN signal | Input | [Ignition switch: OFF] | Less than 1.0 V |
| [Ignition switch: ON] | More than 9.0 V | ||||
| 37 (R) | 20 (B/R) | Battery voltage | - | [Ignition switch: OFF] | More than 9.5 V |
| 39 (B/R) | - | HPCM ground | - | - | - |
| 40 (B/R) | - | HPCM ground | - | - | - |
| 42 (L) | - | HEV system CAN-H | Input/Output | - | - |
| 43 (L) | - | CAN-H | Input/Output | - | - |
| 44 (SB) | 20 (B/R) | READY signal | Input | [Ignition switch: ON] or [READY] | More than 9.5 V |
| [Ignition switch: ON → READY (Start)] | Less than 1.0 V | ||||
| 45 (V) | 20 (B/R) | Inter lock switch | Input | Inter lock switch: OFF | Less than 1.0 V |
| Inter lock switch: ON | More than 9.0 V | ||||
| 46 (W) | 20 (B/R) | Stop lamp switch | Input | Brake pedal: Slightly depressed | More than 9.0 V |
| Brake pedal: Fully released | Less than 1.0 V | ||||
| 48 (G) | 20(B/R) | Electric water pump | Input | [Ignition switch: OFF] | 0 V |
| [READY] | More than 1.0 - 4.0 V | ||||
| 49 (Y) | 20 (B/R) | Service Plug | Input | Service Plug: OFF | Less than 1.0 V |
| Service Plug: ON | More than 9.0 V | ||||
| 54 (P) | - | HEV system CAN-L | Input/Output | - | - |
| 55 (P) | - | CAN1-L | Input/Output | - | - |
| 58 (B) | 20 (B/R) | Transmission range switch | Input | [Ignition switch: ON] Selector lever: P or N | More than 9.0 V |
| [Ignition switch: ON] Selector lever: Except above | Less than 1.0 V | ||||
| 59 (O) | 20 (B/R) | Brake switch | Input | [Ignition switch: ON] Brake pedal: Slightly depressed | Less than 1.0 V |
| [Ignition switch: ON] Brake pedal: Fully released | More than 9.0 V | ||||
| 61 (R) | 20 (B/R) | Electric water pump | Output | [Ignition switch: OFF] | 0 V |
| [READY] | More than 1.0 - 4.0 V | ||||