LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> M35h >> Repair and Diagnosis (Single Page) >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid Control System >> DTC/Circuit Diagnosis >> DTC P062F: Control Module >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON.
    2. Turn ignition switch OFF and wait at least 10 seconds.
    3. Repeat step  1 and  2 for 2 times.
    4. Check 1st trip DTC.

      Is 1st trip DTC detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END