Detailed Flow

WARNING: This page is about a different variant/trim than selected.

INTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items.
- Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred).
- Check if mud, or other foreign objects are not adhering to the sonar sensor.
- Check if there is no deformation, scratches, or other damage to the sonar sensor.
- Check if water has not accumulated in the sonar sensor.
- Check the symptom.
  Is the occurred symptom malfunction?
  
  YES: GO TO 2.
  
  NO: INSPECTION END
DIAGNOSIS WITH CONSULT
1. Connect CONSULT and perform a self-diagnosis for "SONAR". Refer to "CONSULT FUNCTION ".
2. When DTC is detected, follow the instructions below:
- Record DTC and Freeze Frame Data.
  Is DTC displayed?
  
  YES: GO TO 3.
  
  NO: GO TO 4.
TROUBLE DIAGNOSIS FOR DTC
1. Check the DTC indicated in the self-diagnosis results.
2. Perform the relevant diagnosis referring to the DTC Index. Refer to "DTC INDEX ".
  GO TO 5.
TROUBLE DIAGNOSIS FOR SYMPTOMS
Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to "SYMPTOM TABLE ".

GO TO 5.
ERROR PART REPAIR
1. Repair or replace the identified malfunctioning parts.
2. Perform a self-diagnosis for "SONAR" with CONSULT.
3. Check that the symptom does not occur.
  Does the symptom occur?
  
  YES: GO TO 1.
  
  NO: INSPECTION END