Work Procedure
WARNING: This page is about a different variant/trim than selected.
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Before Replace ECU" to save or print current vehicle specification. Refer to "DESCRIPTION ".
NOTE: If "Before Replace ECU" can not be used, use the "Manual Configuration".GO TO 2.
- REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to "EXPLODED VIEW ".
GO TO 3.
- WRITING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "After Replace ECU" or "Manual Configuration" to write vehicle specification. Refer to "WORK PROCEDURE ".
GO TO 4.
- OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
WORK END