LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> G37 IPL, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Drive Positioner (Sedan)) >> DTC/Circuit Diagnosis >> Seat Memory Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "MEMORY SW 1", "MEMORY SW 2" "SET SW" in "Data monitor" mode using CONSULT.
    3. Check seat memory switch signal under the following conditions.
      Monitor item Condition Status
      SET SW SET SW Push ON
      Release OFF
      MEMORY SW 1 Memory switch 1 Push ON
      Release OFF
      MEMORY SW 2 Memory switch 2 Push ON
      Release OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals