LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> G37 IPL, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Drive Positioner (Sedan)) >> DTC/Circuit Diagnosis >> Detention Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "DETENT SW" signal in "Data monitor" mode using CONSULT.
    3. Check detention switch signal under the following conditions.
      Monitor item Condition Status
      DETENT SW Selector lever P position OFF
      Other than above ON

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals