LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> G37 IPL, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Drive Positioner (Sedan)) >> Basic Inspection >> Inspection And Adjustment >> System Initialization >> SYSTEM INITIALIZATION: Special Repair Requirement >> Initialization Procedure

Initialization Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHOOSE METHOD

    There are two initialization methods.

    Which method do you use? 

    With door switch: GO TO 2.

    With vehicle speed: GO TO  4.

  2. STEP A-1

    Turn ignition switch from ACC to OFF position.

    GO TO 3.

  3. STEP A-2

    Driver door switch is ON (open) → OFF (close) → ON (open).

    END

  4. STEP B-1

    Drive the vehicle at more than 25 km/h (16 MPH).

    END

scientia non olet · About LEMON Manuals