User Mode

In USER MODE, air bag warning lamp on combination meter blinks when a malfunction is detected and warns the customer (driver).

How to Read Air Bag Warning Lamp

1. Turn the ignition switch from OFF to ON, and check that the air bag warning lamp blinks.
2. Compare the air bag warning lamp blinking pattern with the examples.

Air bag warning lamp operation (user mode)	SRS condition	Reference item
	No malfunction is detected No further action is necessary	-
	The system is malfunctioning Self diagnostic result is not erased after repair	Erase "Self Diagnostic Result" Refer to "CONSULT FUNCTION ", How to Erase Self-diagnostic Result
	Battery voltage is low (less than 9 V)	Check "Cause of Warning Lamp" with CONSULT Refer to "CONSULT FUNCTION "
	Malfunction occurs in Occupant Classification System	Go to "DIAGNOSIS PROCEDURE "
	Intermittent malfunction is detected in the past	Go to "INTERMITTENT INCIDENT "
	Air bag is deployed Seat belt pre-tensioner is deployed Pop-up roll bar is deployed	Go to "DIAGNOSIS PROCEDURE " or "DIAGNOSIS PROCEDURE "
	Air bag diagnosis sensor unit is malfunctioning Air bag power supply circuit is malfunctioning Air bag warning lamp circuit is malfunctioning	Go to "DIAGNOSIS PROCEDURE "
	Air bag diagnosis sensor unit is malfunctioning Air bag warning lamp circuit is malfunctioning	Go to "DIAGNOSIS PROCEDURE "