LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 107 (Security Control System (Sedan)) >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK ENGINE START FUNCTION
    1. Perform the check for DTC except DTC P1610.
    2. Use CONSULT to erase DTC after fixing.
    3. Turn ignition switch OFF.
    4. Turn ignition switch ON when registered Intelligent Key is inserted into key slot and wait for 5 seconds.
    5. Turn the ignition switch OFF and wait 5 seconds.
    6. Repeat steps  4 and  5 twice (a total of 3 times).
    7. Check that engine can start when registered Intelligent Key is inserted into key slot.

      INSPECTION END