LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Continuously Variable Transmission (CVT)) >> Service Information >> Shift Control System >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Make sure that parking brake is applied before removal and installation.
  1. Place the selector lever in the "P" position.
  2. Remove the IP center assembly. Refer to INSTRUMENT PANEL ASSEMBLY .
  3. Disconnect the CVT shift selector harness connector.
  4. Remove the key interlock cable from the CVT shift selector assembly. Refer to "REMOVAL AND INSTALLATION ".
  5. Remove the control cable from the CVT shift selector assembly.
  6. Remove the nuts and the CVT shift selector assembly.
scientia non olet · About LEMON Manuals