LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Continuously Variable Transmission (CVT)) >> Service Information >> DTC P1778: Step Motor >> DTC Confirmation Procedure >> Notes

DTC Confirmation Procedure: Notes

WARNING: This page is about a different car, the 2010 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Always drive vehicle at a safe speed.
  • Before starting "DTC Confirmation Procedure", confirm "Hi" or "Mid" or "Low" fixation by "PRI SPEED" and "VEHICLE SPEED" on "DATA MONITOR MODE".
  • If hi-geared fixation occurred, go to "DIAGNOSIS PROCEDURE ".
NOTE: If "DTC Confirmation Procedure" has been previously performed, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.

After the repair, touch "ERASE" on "SELF-DIAG RESULTS" and then perform the following procedure to confirm the malfunction is eliminated.