LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System (Convertible) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Special Repair Requirement >> Initialization Procedure

Initialization Procedure

  1. Disconnect battery terminal or power window main switch connector while operating power window. Reconnect it after a minute or more.
  2. Door close (door switch OFF)
  3. Turn ignition switch ON.
  4. Fully open retractable hard top system and rear power window. This operation is not necessary if retractable hard top system and rear power window are fully open.
  5. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open)
  6. Continue pulling the power window switch UP (AUTO-UP operation). Even after glass stops at fully closed position, keep pulling the switch for 3 seconds or more.
  7. Inspect anti-pinch function.
scientia non olet · About LEMON Manuals