Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK TERMINALS AND HARNESS CONNECTORS
Check EPS control unit pin terminals for damage or loose connection with harness connector. If any items are damaged, repair or replace error-detected parts.
Is the inspection result normal?
YES: GO TO 2.
NO: Repair or replace error-detected parts.
- PERFORM SELF-DIAGNOSIS
With CONSULT
- Erase self-diagnostic results for "EPS".
- Turn the power switch OFF, and then wait 10 seconds and more.
- Turn the power switch OFF to ON.
- Perform self-diagnosis for "EPS".
Is DTC "C1604" detected?
YES: Torque sensor is malfunctioning. Replace steering column assembly. Refer to "REMOVAL AND INSTALLATION ".
NO: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".