Data Monitor
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
DATA MONITOR ITEM DESCRIPTION
| Item (Unit) | Note: | ||
|---|---|---|---|
| STATIC OPE FREQUENCY | Displays the number of times the electric parking brake is applied while the vehicle is stopped | ||
| DYNAMIC OPE FREQUENCY | Displays the number of times the electric parking brake is applied while the vehicle is being driven | ||
| TENSION SENSOR 1 (V) | Displays output voltage value of the tension sensor 1(1) | ||
| TENSION SENSOR 2 (V) | Displays output voltage value of the tension sensor 2(1) | ||
| POWER SUPPLY VOLTAGE (V) | Displays power supply voltage of the electric parking brake control module | ||
| TENSION SEN 1 MONITOR (N) | Displays the tensile force applied to the tension sensor 1(1) | ||
| TENSION SEN 2 MONITOR (N) | Displays the tensile force applied to the tension sensor 2(1) | ||
| TARGET LOAD (N) | Displays the target tensile force | ||
| BRAKE SWITCH (ON/OFF) | Displayed when the parking brake switch is pulled | ||
| RELEASE SWITCH (ON/OFF) | Displayed when the parking brake switch is pressed | ||
| ANALOG SWITCH (V) | Displays power supply voltage of the parking brake switch | ||
| MALFUNCTION STATUS (NORMAL/DEFECT/SEVERE) | Displays malfunction status of the electric parking brake system | ||
| PARKING BRAKE SATUS (NO DTR/RELEAS/LOCK/DR/LCK DR RLS) | Displays the electric parking brake system status | ||
| IGNITION SWITCH FROM IPDM (ON/OFF) | Displays the power switch ON signal from the IPDM E/R via CAN communication | ||
| BRAKE SWITCH FROM BCM (On/Off/INVALID) | Displays the stop lamp switch signal from the BCM via CAN communication | ||
| WHEEL SENSOR REAR RH (RPM) | Displays the rear RH wheel sensor signal from the ABS actuator and electric unit (control unit) via CAN communication | ||
| WHEEL SENSOR REAR LH (RPM) | Displays the rear LH wheel sensor signal from the ABS actuator and electric unit (control unit) via CAN communication | ||
| DECEL G SENSOR (G) | Displays the rear decel G signal from the ABS actuator and electric unit (control unit) via CAN communication | ||
| VEHICLE SPEED (km/h) | Displays the vehicle speed signal from the ABS actuator and electric unit (control unit) via CAN communication | ||
| ACCELE OPEN ANGLE (%) | Displays the accelerator pedal position signal from the VCM via CAN communication | ||
| ENGINE STATUS (STOP/Run) | Displays the traction motor status from the VCM via CAN communication | ||
| DIAG PROHIBIT (On/Off) | Displays the diagnostic status via CONSULT | ||
| SHIFT RANGE (LIMP/P/R/N/D) | Displays the shift position status from the VCM via CAN communication | ||
| BUCKLE SWITCH (ON/OFF) | Displays the seat belt buckle switch signal (driver side) signal from the combination meter via CAN communication | ||
|
|||