DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press power switch under the following conditions, and wait at least 1 second.
- Shift position: P or N
- Brake pedal: Depressed
- Check DTC in "Self diagnostic result" mode of "BCM" using CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Press power switch under the following conditions, and wait at least 1 second.