| BCM |
Controls the Intelligent Key system. |
| IPDM E/R |
Sounds horn and blinks head lamp via CAN communication between BCM. |
| Door lock actuator |
Outputs lock/unlock signal from BCM and locks/unlocks each door. |
| Fuel lid lock actuator |
Performs lock/unlock of the fuel lid. |
| Door switch |
Inputs door open/close condition to BCM. |
| Remote keyless entry receiver |
Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM. |
| Request switch |
Inputs lock/unlock operation to BCM. |
| Key slot |
Inputs key insert/remove signal to BCM. |
| Intelligent Key |
Transmits button operation to remote keyless entry receiver. |
| Outside key antenna |
Detects if Intelligent Key is outside the vehicle. |
| Inside key antenna |
Detects if Intelligent Key is inside the vehicle. |
| Unlock sensor |
Detects door lock condition of driver door. |
| A/T shift selector (detention switch) |
Detects the P range position of A/T selector lever. |
| Unified meter and A/C amp. |
Transmits vehicle seep signal to CAN communication line. |
| Combination meter |
Display, buzzer (combination meter) and KEY warning lamp are installed to combination meter. |
| Trunk lid opener actuator |
Transmits trunk open operation to BCM. |
| Trunk lid opener request switch |
Inputs lock/unlock operation to BCM. |
| Trunk lid opener cancel switch |
Cancels the trunk open operation. |
| Trunk room lamp switch |
Inputs trunk lid open/close condition to BCM. |
| Intelligent Key warning buzzer |
Warns the user of the lock/unlock condition and inappropriate operations with the buzzer sound. |
| Hazard warning lamp |
Warns the user of the door and trunk lid open/close condition and inappropriate operations with the lamps blink. |
| TCM |
Transmits shift position signal to BCM via CAN communication line. |
| Push-button ignition switch |
Inputs push-button ignition switch ON/OFF condition to BCM. |