Physical Values
E-SUS CONTROL UNIT TERMINALS DESCRIPTION CHART
| Terminal No. (Wire color) | Description | Condition | Value (Approx.) | ||
|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||
| 1 (L) | Ground | E-SUS control unit power supply | Input | Ignition switch ON | Battery voltage |
| 2 (P) | - | Front RH shock absorber actuator LOW terminal | - | - | - |
| 3 (V) | - | Front RH shock absorber actuator HI terminal | - | - | - |
| 4 (G) | - | Front LH shock absorber actuator LOW terminal | - | - | - |
| 5 (Y) | - | Front LH shock absorber actuator HI terminal | - | - | - |
| 6 (LG) | - | Rear LH shock absorber actuator HI terminal | - | - | - |
| 7 (V) | - | Rear LH shock absorber actuator LOW terminal | - | - | - |
| 8 (L) | - | Rear RH shock absorber actuator HI terminal | - | - | - |
| 9 (P) | - | Rear RH shock absorber actuator LOW terminal | - | - | - |
| 10 (BG) | Ground | Front LH wheel vertical G sensor output voltage | Input | Ignition switch ON | Approx. 2.35 - 2.65 V |
| 11 (SB) | Ground | Front RH body vertical G sensor output voltage | Input | Ignition switch ON | Approx. 2.35 - 2.65 V |
| 12 (R) | Ground | Front LH body vertical G sensor output voltage | Input | Ignition switch ON | Approx. 2.35 - 2.65 V |
| 14 (G) | Ground | Rear body vertical G sensor output voltage | Input | Ignition switch ON | Approx. 2.35 - 2.65 V |
| 17 (L) | Ground | E-SUS control unit power supply | Input | Ignition switch ON | Battery voltage |
| 18 (B) | Ground | Ground | - | Always | 0 V |
| 19 (B) | Ground | Ground | - | Always | 0 V |
| 20 (W) | - | Mode switch terminal | - | - | - |
| 23 (G) | - | Mode lamp terminal | - | - | - |
| 24 (W) | Ground | Front RH wheel vertical G sensor output voltage | Input | Ignition switch ON | Approx. 2.35 - 2.65 V |
| 25 (Y) | Ground | Rear body vertical G sensor ground | - | Always | 0 V |
| 26 (BR) | Ground | Front vertical G sensor ground | - | Always | 0 V |
| 27 (GR) | Ground | Front vertical G sensor power supply | Output | Ignition switch ON | Approx. 4.75 - 5.25 V |
| 29 (P) | - | CAN-L | - | - | - |
| 30 (LG) | Ground | Rear vertical G sensor power supply | Output | Ignition switch ON | Approx. 4.75 - 5.25 V |
| 32 (L) | - | CAN-H | - | - | - |
CAUTION:
Never extend connector terminals forcibly, when checking voltage using a circuit tester for voltage inspection.