DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Turn ignition switch ON under the following conditions and wait for at least 2 seconds.
- Selector lever is in the P or N position.
- Do not depress brake pedal.
- Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Turn ignition switch ON under the following conditions and wait for at least 2 seconds.