Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SUNLOAD SENSOR

Turn ignition switch ON.
Check voltage between unified meter and A/C amp. harness connector and ground.

VOLTAGE SPECIFICATION

(+)		(-)
Unified meter and A/C amp.		-
Connector	Terminal	-
M67	46	Ground

Fig 1: Sunload Sensor Voltage Graph

Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: Select a place where sunshine directly on it when checking sunload sensor.

Is the inspection result normal?

YES: END.

NO: Replace sunload sensor.