Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK INTAKE SENSOR

Turn ignition switch OFF.
Disconnect intake sensor connector.
Check resistance between intake sensor terminals.

RESISTANCE SPECIFICATION

Terminal		Condition	Resistance kΩ
Terminal		Temperature °C (°F)	Resistance kΩ
1	2	-15 (5)	12.34
		-10 (14)	9.62
		-5 (23)	7.56
		0 (32)	6.00
		5 (41)	4.80
		10 (50)	3.87
		15 (59)	3.15
		20 (68)	2.57
		25 (77)	2.12
		30 (86)	1.76
		35 (95)	1.47
		40 (104)	1.23
		45 (113)	1.04

Is the inspection result normal?

YES: END.

NO: Replace intake sensor.