Auto Intake Interlocking Movement Change Function (With ACCS): Description
WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
Conditions for interlocking movement of intake switch (auto intake mode) and A/C switch can be changed. In addition, operation of the intake switch, which activates the auto intake control system, can be set to become available when the A/C switch is ON.
Operating procedures for this trimmer are as follows:
- Begin self-diagnosis STEP-5 mode. Refer to "DIAGNOSIS DESCRIPTION ".
- Press fan (UP:+) switch three times to set system in auxiliary mode.
- Press A/C switch and intake switch as desired.
AUTO INTAKE INDICATOR STSTUS
| A/C indicator | AUTO INTAKE indicator | Setting status |
|---|---|---|
| ON | ON | A/C switch indicator turns ON automatically when auto intake mode is selected with Intake switch. Auto intake mode continues after A/C switch turns OFF. |
| OFF | ON | A/C switch indicator stays OFF when auto intake mode is selected with Intake switch. Auto intake mode continues after A/C switch turns OFF. |
| ON | OFF | A/C switch indicator turns ON automatically when auto intake mode is selected with Intake switch. When A/C switch turns OFF, auto intake mode turns OFF automatically. (Initial setting) |
| OFF | OFF | Auto intake mode can be set only when A/C switch is ON. When A/C switch turns OFF, auto intake mode turns OFF automatically. |
NOTE:
When battery cable is disconnected or battery voltage is below 10 V, auto intake interlocking movement change function is canceled. Auto intake interlocking movement change function set becomes that of initial condition.