LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio, Visual & Navigation System (Navigation) >> DTC/Circuit Diagnosis >> Power Supply And Ground Circuit >> Around View Monitor Control Unit >> AROUND VIEW MONITOR CONTROL UNIT: Diagnosis Procedure

AROUND VIEW MONITOR CONTROL UNIT: Diagnosis Procedure

  1. CHECK FUSE

    Check for blown fuses.

    Power source Fuse No.
    Battery 34
    Ignition switch ACC 19

    Is inspection result normal? 

    YES: GO TO 2.

    NO: Be sure to eliminate cause of malfunction before installing new fuse.

  2. CHECK POWER SUPPLY CIRCUITS

    Check voltage between around view monitor control unit harness connector and ground.

    Signal name Connector No. Terminal No. Ignition switch position Value (Approx.)
    Battery power supply B46 2 OFF Battery voltage
    ACC power supply B46 4 ACC Battery voltage

    Is inspection result normal? 

    YES: GO TO 3.

    NO: Check harness between around view monitor control unit and fuse.

  3. CHECK GROUND CIRCUIT
    1. Turn ignition switch OFF.
    2. Disconnect around view monitor control unit connector.
    3. Check continuity between around view monitor control unit harness connector and ground.
    Signal name Connector No. Terminal No. Ignition switch position Continuity
    Ground B46 1 OFF Existed

    Is inspection result normal? 

    YES: INSPECTION END

    NO: Repair harness or connector.

scientia non olet · About LEMON Manuals