LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> EX35 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Body Control System) >> On-Vehicle Repair >> Combination Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove steering column cover. Refer to EXPLODED VIEW .
  2. Remove screws.
  3. Disconnect the connector.
  4. Pull up the combination switch to remove it.
scientia non olet · About LEMON Manuals