Diagnosis Procedure
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECTION START
- Turn ignition switch ON.
- Check "Self diagnostic result" with CONSULT-III.
- Touch "ERASE".
- Perform DTC Confirmation Procedure.
Refer to DTC LOGIC .
Is the DTC B26E9 displayed again?
YES: GO TO 2.
NO: GO TO 3.
- REPLACE STEERING LOCK UNIT
- Replace steering lock unit.
- Perform DTC confirmation procedure. Refer to DTC LOGIC .
Is the DTC B26E9 displayed again?
YES: GO TO 3.
NO: INSPECTION END
- CHECK INTERMITTENT INCIDENT
Refer to INTERMITTENT INCIDENT .
INSPECTION END