Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

Remove low-pressure pipe 1 and high-pressure pipe 2. Refer to EXPLODED VIEW .
CAUTION: Cap or wrap the joint of the A/C piping with suitable material such as vinyl tape to avoid the entry of air.
Slide evaporator (1) to passenger side, and then remove intake sensor (2).

Fig 1: Identifying Evaporator & Intake Sensor
Courtesy of NISSAN MOTOR CO., U.S.A.