LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> EX35 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical System >> Unit Disassembly And Assembly >> Cylinder Block >> Inspection >> Connecting Rod Bolt Outer Diameter

Connecting Rod Bolt Outer Diameter

  1. Measure the outer diameters [(a), (b) and (c)] at the position shown in the figure.
    Fig 1: Identifying Connecting Rod Bolt Outer Diameter
    G08193502Courtesy of NISSAN NORTH AMERICA, INC.
  2. Obtain a mean value (d) of (a) and (b).
  3. Subtract (c) from (d).

    Limit [(d) - (c)]: 0.09 mm (0.0035 in) 

  4. If it exceeds the limit (large difference in dimensions), replace the bolt with new one.
scientia non olet · About LEMON Manuals