Work Step

When removing instrument panel assembly, combination meter, AV control unit, and center console assembly take steps in the order shown by the number below.

PARTS	INSTRUMENT PANEL ASSEMBLY	COMBINATION METER	AV CONTROL UNIT	CENTER CONSOLE ASSEMBLY
Console finisher assembly	[1]		[1]	[1]
Console sub harness connectors	[2]			[2]
Center console assembly fixing screws	[3]			[3]
Console center finisher	[4]			[4]
Console rear finisher	[5]			[5]
Rear ventilator duct 2	[6]			[6]
Center console assembly fixing screws	[7]			[7]
Center console assembly	[8]			[8]
Instrument side finisher LH	[9]
Instrument lower panel LH	[10]
Driver air bag module	[11]
Steering wheel	[12]
Steering column covers	[13]	[1]
Combination switch	[14]	[2]
Spiral cable	[15]
Cluster lid A (upper)	[16]	[3]
Cluster lid A	[17]	[4]
Combination meter	[18]	[5]
Instrument harness fixing clips	[19]
Trip A/B reset switch harness connector	[20]
Front body side welt LH	[21]
Front pillar garnish LH	[22]
Antenna connectors	[23]
Harness clip	[24]
Speaker grille LH	[25]
Center speaker grille	[26]
Center speaker (with BOSE AUDIO)	[27]
Instrument side panel LH	[28]
Inside key antenna	[29]
Harness connector bracket fixing screw	[30]
Cluster lid C	[31]		[2]
Cluster lid D	[32]		[3]
Display unit	[33]		[4]
AV control unit	[34]		[5]
Push button ignition switch	[35]
Front defroster grille LH	[36]
Front defroster grille RH	[37]
Instrument side finisher RH	[38]
Glove box assembly	[39]
Instrument lower cover	[40]
Instrument lower panel RH	[41]
Passenger air bag module connector	[42]
Passenger air bag module fixing bolt	[43]
Instrument side panel RH	[44]
Front body side welt RH	[45]
Front pillar garnish RH	[46]
Speaker grille RH	[47]
Instrument panel assembly	[48]
[]: Number indicates step in removal procedures.

WARNING: Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or more.

CAUTION: When removing, always use a remover tool that is made of plastic.