Diagnosis Procedure
- CHECK DTC WITH TCM
Check "Self diagnostic result" with CONSULT. Refer to "DTC INDEX ".
Is the inspection result normal?
YES: GO TO 2.
NO: Repair or replace the malfunctioning parts.
- CHECK TRANSMISSION RANGE SWITCH CIRCUIT
- Turn ignition switch OFF.
- Disconnect TCM connector and BCM connector.
- Check continuity between TCM harness connector and BCM harness connector.
TCM BCM Continuity Connector Terminal Connector Terminal F51 9 M123 140 Existed - Check continuity between TCM harness connector and ground.
TCM Ground Continuity Connector Terminal F51 9 Not existed Is the inspection result normal?
YES: GO TO 3.
NO: Repair or replace harness or connector.
- CHECK INTERMITTENT INCIDENT
Refer to "INTERMITTENT INCIDENT ".
: INSPECTION END