LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> EX35 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Warning Chime System >> DTC/Circuit Diagnosis >> Meter Buzzer Circuit >> Component Function Check

Component Function Check

  1. CHECK OPERATION OF METER BUZZER
    1. Select "BUZZER" of "BCM" on CONSULT.
    2. Perform "LIGHT WARN ALM" of "ACTIVE TEST".

      Does meter buzzer beep? 

      YES: INSPECTION END

      NO: GO TO 2.

  2. CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL

    Select the "Data Monitor" for the "METER/M&A" and check the "BUZZER" monitor value.

    BUZZER

    Under the condition of buzzer input: On

    Except above: Off

    Is the inspection result normal? 

    YES: Replace combination meter.

    NO: Replace BCM. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals