Physical Values
TERMINALS REFERENCE
| Terminal (Wire color) |
Description | Condition | Value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 1 (V) | Ground | Power supply | Input | Ignition switch ON | Battery voltage | |
| Ignition switch OFF | 0 V | |||||
| 2 (P) | Ground | Power supply (Memory back-up) | Input | Always | Battery voltage | |
| 3 (L) | - | CAN-H | Input/Output | - | - | |
| 4 (SB) | - | K-line | Input/Output | - | - | |
| 5 (B) | Ground | Ground | Output | Always | 0 V | |
| 6 (V) | Ground | Power supply | Input | Ignition switch ON | Battery voltage | |
| Ignition switch OFF | 0 V | |||||
| 7 (R) | Ground | Back-up lamp relay | Input | Ignition switch ON | Selector lever in "R" position. | 0 V |
| Selector lever in other than above. | Battery voltage | |||||
| 8 (P) | - | CAN-L | Input/Output | - | - | |
| 9 (BR) | Ground | Starter relay | Output | Ignition switch ON | Selector lever in "N" and "P" positions. | Battery voltage |
| Selector lever in other than above. | 0 V | |||||
| 10 (B) | Ground | Ground | Output | Always | 0 V | |