Wheel Alignment
WHEEL ALIGNMENT SPECIFICATION
| Item | Standard | ||
|---|---|---|---|
| Camber Degree minute (Decimal degree) | Minimum | -1° 00' (-1.00°) | |
| Nominal | -0° 30' (-0.50°) | ||
| Maximum | 0° 00' (0.00°) | ||
| Left and right difference | 0° 45' (0.75°) or less | ||
| Toe-in | Total toe-in Distance | Minimum | 0 mm (0 in) |
| Nominal | In 3.4 mm (0.134 in) | ||
| Maximum | In 6.8 mm (0.268 in) | ||
| Toe angle (left wheel or right wheel) Degree minute (Decimal degree) | Minimum | 0° 00' (0.00°) | |
| Nominal | In 0° 07' (0.12°) | ||
| Maximum | In 0° 14' (0.23°) | ||
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.