Diagnosis Procedure
- CHECK OIL PRESSURE WARNING LAMP
- Start engine.
- Check oil pressure warning lamp and confirm it is not illuminated.
Is oil pressure warning lamp illuminated?
YES: Proceed to "INSPECTION ".
NO: GO TO 2.
- CHECK INTAKE VALVE TIMING CONTROL SOLENOID VALVE
Refer to "COMPONENT INSPECTION (INTAKE VALVE TIMING CONTROL SOLENOID VALVE) ".
Is the inspection result normal?
YES: GO TO 3.
NO: Replace malfunctioning intake valve timing control solenoid valve.
- CHECK CRANKSHAFT POSITION SENSOR
Refer to "COMPONENT INSPECTION (CRANKSHAFT POSITION SENSOR) ".
Is the inspection result normal?
YES: GO TO 4.
NO: Replace crankshaft position sensor.
- CHECK CAMSHAFT POSITION SENSOR
Refer to "COMPONENT INSPECTION (CAMSHAFT POSITION SENSOR) ".
Is the inspection result normal?
YES: GO TO 5.
NO: Replace malfunctioning camshaft position sensor.
- CHECK CAMSHAFT SPROCKET (SIGNAL PLATE)
Check the following.
- Accumulation of debris to the signal plate of camshaft sprocket (INT)
- Chipping signal plate of camshaft sprocket (INT)
Is the inspection result normal?
YES: GO TO 6.
NO: Remove debris and clean the signal plate of camshaft sprocket (INT) or replace camshaft sprocket (INT). Refer to "EXPLODED VIEW ".
- CHECK TIMING CHAIN INSTALLATION
Check service records for any recent repairs that may cause timing chain misaligned.
Are there any service records that may cause timing chain misaligned?
YES: Check timing chain installation. Refer to "EXPLODED VIEW ".
NO: GO TO 7.
- CHECK LUBRICATION CIRCUIT
Perform "Inspection of Camshaft Sprocket (INT) Oil Groove". Refer to "INSPECTION ".
Is the inspection result normal?
YES: GO TO 8.
NO: Clean lubrication line.
- CHECK INTERMITTENT INCIDENT
Refer to "INTERMITTENT INCIDENT ".
INSPECTION END