LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> M56 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (LAN System) >> [Can Gateway] >> Basic Inspection >> Additional Service When Replacing Can Gateway >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. SAVING VEHICLE SPECIFICATION

    CONSULT-III Configuration

    Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "DESCRIPTION ".

    NOTE: If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing CAN gateway.

    Go to 2.

  2. REPLACE CAN GATEWAY

    Replace CAN gateway. Refer to "REMOVAL AND INSTALLATION ".

    Go to 3.

  3. WRITING VEHICLE SPECIFICATION

    CONSULT-III Configuration

    Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to "WORK PROCEDURE ".

    WORK END

scientia non olet · About LEMON Manuals