LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> M56 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - Component Testing, Symptom Diagnosis, Periodic Maintenance, Removal And Installation, Specifications (VK56VD) >> Removal And Installation >> VVEL Control Module >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove hoodledge cover (RH) and cowl top cover (RH). Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the battery and battery tray. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove VVEL control module bracket bolts (A).
  4. Remove the ground harness fix bolt (B).
  5. Remove VVEL control module bracket (1).
    Fig 1: Identifying VVEL Control Module Bracket, VVEL Control Module Bracket Bolts And Ground Harness Fix Bolt
    G07020527Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Disconnect VVEL control module harness connector.
  7. Remove the fix bolts (A). And then separate VVEL control module (1), ground harness (2) and VVEL control module bracket (3).
    Fig 2: Identifying Fix Bolts, VVEL Control Module, Ground Harness And VVEL Control Module Bracket
    G07020528Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals