Removal and Installation: Installation

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Note the following and install in the reverse order of removal:

When installing control cable (1) to A/T shift selector assembly (2), check that control cable is fully pressed in with the ribbed (A) surface facing upward.
Refer to the following when installing the selector lever knob to the A/T shift selector assembly:

Install the lock pin to the selector lever knob.
Insert the shift lever knob into the shift lever until it clicks.
CAUTION:
- Install it straight, and never tap or apply any shock to install it.
- Never press selector button.
  
  Fig 1: Identifying Control Cable, A/T Shift Selector Assembly And Ribbed
  Courtesy of NISSAN NORTH AMERICA, INC.