LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Automatic Drive Positioner) >> Ecu Diagnosis Information >> Driver Seat Control Unit >> DTC Index

DTC Index

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT display Timing*1 Item
Current malfunction Previous malfunction
U1000 CAN COMM CIRCUIT  0 1-39 CAN communication
U1010 CONTROL UNIT (CAN)  0 1-39 Control unit
B2112 SLIDING MOTOR  0 1-39 Seat slide motor output
B2113 RECLINING MOTOR  0 1-39 Seat reclining motor output
B2116 TILT MOTOR  0 1-39 Tilt motor output
B2128 UART COMMUNICATION LINE  0 1-39 UART communication
B2130 EEPROM  0 1-39 EEPROM
  • (1) 0: Current malfunction is present
  • 1-39: Displayed if any previous malfunction is present when current condition is normal. The numeral value increases by one at each IGN ON to OFF cycle from 1 to 39. The counter remains at 39 even if the number of cycles exceeds it. However, the counter is reset to 1 if any malfunction is detected again, the normal operation is resumed and the ignition switch is turned from OFF to ON.
scientia non olet · About LEMON Manuals