LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 294 (Engine Control System - Component Testing) >> Removal And Installation >> ECM >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery and battery tray. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect ECM harness connectors (1) as shown in the figure.
  3. Remove ECM bracket bolts (A).
  4. Separate ECM (2) and ECM bracket (3).
    Fig 1: Identifying ECM Bracket Bolts
    G07026393Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals