LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Control System - Introduction) >> System Description >> Diagnosis System (ECM) >> On Board Diagnosis Function >> SRT Status Mode >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and wait 20 seconds.
  2. SRT status is indicated as shown below.
    • ECM continues to illuminate MIL if all SRT codes are set.
    • ECM blinks MIL for about 10 seconds if all SRT codes are not set.
Fig 1: SRT Status Blinking Pattern
G08260086Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals