Component Description
WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
| Part |
Description |
| IPDM E/R |
- Controls the integrated relay according to the request (via CAN communication) from BCM.
- Performs the auto stop control of the front wiper.
|
| BCM |
- Judges each switch status by the combination switch reading function.
- Requests (via CAN communication) the front wiper relay and the front wiper high relay ON to IPDM E/R.
- Supplies power to the rear wiper motor.
- Performs the auto stop control of the rear wiper.
- Requests (via CAN communication) the headlamp washer relay ON to IPDM I/R.
|
| Rain sensor |
Detects water droplets on the windshield with infrared rays, and transmits the rain sensor signal to BCM via the rain sensor serial link. |
| Combination switch (Wiper & washer switch) |
Refer to
"COMBINATION SWITCH READING SYSTEM: SYSTEM DESCRIPTION
". |
| Washer switch |
Refer to
"WASHER SWITCH ". |
| Washer pump |
- Washer fluid is sprayed according to washer switch states.
- Combination switch operates front washer or rear washer by changing voltage polarity to be supplied to washer pump.
|
| Headlamp washer pump |
Washer fluid is sprayed according to washer switch states and headlamp switch status. |
| Front wiper motor |
- IPDM E/R controls front wiper operation.
- Front wiper stop position signal is transmitted to IPDM E/R.
|
| Rear wiper motor |
- BCM controls rear wiper operation.
- Rear wiper stop position signal is transmitted to BCM.
|
| Combination meter |
Transmits the vehicle speed signal to BCM via CAN communication. |