Wheel Alignment: Adjustment: Toe-In
WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
Adjust with adjusting bolt (1) in rear lower link (2).
Toe-In: Refer to "WHEEL ALIGNMENT ".
CAUTION:
- Be sure to adjust equally on right and left side with adjusting bolt.
- When tightening the nut firmly and checking the torque, use a wrench to prevent the turning of bolt.
- If toe-in is not still within the specification, inspect and replace any damaged or worn suspension parts.
- After toe-in adjustment, adjust neutral position of steering angle sensor. Refer to "WORK PROCEDURE ".