LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Meter, Warning Lamp & Indicator -- G37 Convertible) >> DTC/Circuit Diagnosis >> Fuel Level Sensor Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK UNIFIED METER AND A/C AMP. OUTPUT SIGNAL
    1. Connect the CONSULT-III.
    2. Select the "Data Monitor" for the "METER/M&A" and compare the "FUEL METER" monitor value with the fuel gauge reading on the combination meter.
      FUEL GAUGE REFERENCE

      Fuel gauge pointer Reference value of data monitor [lit.]
      Full Approx. 72.8
      Three quarters Approx. 59.2
      Half Approx. 40.0
      A quarter Approx. 20.8
      Empty Approx. 5.6

      Does monitor value match fuel gauge reading? 

      YES: INSPECTION END

      NO: Replace combination meter.

scientia non olet · About LEMON Manuals