Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti G25. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUEL PUMP

Turn ignition switch OFF.
Disconnect "fuel level sensor unit and fuel pump (main)" harness connector.

Check resistance between "fuel level sensor unit and fuel pump (main)" terminals as follows.

TERMINALS RESISTANCE REFERENCE CHART

Terminals	Resistance
1 and 3	0.2 - 5.0 Ω [at 25°C (77°F)]

Is the inspection result normal?

YES: INSPECTION END

NO: Replace "fuel level sensor unit and fuel pump (main)". Refer to "REMOVAL AND INSTALLATION ".