LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner System -- G37 Convertible >> DTC/Circuit Diagnosis >> Telescopic Sensor >> Component Function Check

Component Function Check

  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "TELESCO SEN" in the "Data monitor" mode using CONSULT-III.
    3. Check the tilt sensor signal under the following conditions.
      MONITOR ITEM CONDITION CHART

      Monitor item Condition Value
      TELESCO SEN Telescopic position Change between
      0.5 [V] (close to top)
      4.5 [V] (close to bottom)

      Is the indication normal? 

      YES: INSPECTION END.

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals